Hibanker / Dredge Hopper
Use this quality precision laser cut aluminum Hibanker / Dredge Hopper to
convert your stream sluice into a Hibanker or dredge. The classifier
screen is removable and is made of powder coated steel. The top of the
hopper is 18 inches x 18 inches with spray bars. The water inlet is
equipped with a 1 1/2 inch slip fitting which can be removed to use 1 1/2
inch pipe fittings. The water supply can be adjusted with a valve which is
included. Comes ready to go as a 2 inch dredge hopper and can be
easily modified to use with a 2 1/2 inch dredge. Works on the JOBE 45
Yellow Jacket, the Keene A52, or any 10 inch wide sluice. The mounting
holes are precut to bolt onto the JOBE sluice and the JOBE sluice stand.
Mounting to the Keene A52 requires two 1/4" holes to be drilled on the
sides of the hopper. Total weight is just 14 pounds. The removable
classifier screen weighs 5 1/ 2 pounds. #-6508 $249.95
Use this quality precision laser cut aluminum Hibanker / Dredge Hopper to
convert your stream sluice into a Hibanker or dredge. The classifier
screen is removable and is made of powder coated steel. The top of the
hopper is 18 inches x 18 inches with spray bars. The water inlet is
equipped with a 1 1/2 inch slip fitting which can be removed to use 1 1/2
inch pipe fittings. The water supply can be adjusted with a valve which is
included. Comes ready to go as a 2 inch dredge hopper and can be
easily modified to use with a 2 1/2 inch dredge. Works on the JOBE 45
Yellow Jacket, the Keene A52, or any 10 inch wide sluice. The mounting
holes are precut to bolt onto the JOBE sluice and the JOBE sluice stand.
Mounting to the Keene A52 requires two 1/4" holes to be drilled on the
sides of the hopper. Total weight is just 14 pounds. The removable
classifier screen weighs 5 1/ 2 pounds. #-6508 $249.95
Sluice Header Box
Converts your stream sluice into a power sluice or hibanker. All precision
laser cut aluminum construction. Works on the JOBE 45 Yellow Jacket,
the Keene A52, or any 10 inch wide sluice. The mounting holes are
precut to bolt onto the JOBE sluice and the JOBE sluice stand. Mounting
to the Keene A52 requires two 1/4" holes to be drilled on the sides of the
header box. Weighs only 3 pounds. #-6505 $69.95
Converts your stream sluice into a power sluice or hibanker. All precision
laser cut aluminum construction. Works on the JOBE 45 Yellow Jacket,
the Keene A52, or any 10 inch wide sluice. The mounting holes are
precut to bolt onto the JOBE sluice and the JOBE sluice stand. Mounting
to the Keene A52 requires two 1/4" holes to be drilled on the sides of the
header box. Weighs only 3 pounds. #-6505 $69.95
Dredge Header Box
The JOBE Dredge Header Box is used to convert your stream sluice into
a 2 inch dredge. All precision laser cut aluminum construction. Works on
the JOBE 45 Yellow Jacket, the Keene A52, or any 10 inch wide sluice.
The mounting holes are precut to bolt onto the JOBE sluice and the
JOBE sluice stand. Mounting to the Keene A52 requires two 1/4" holes
to be drilled on the sides of the header box. Weighs only 3 pounds.
#-6507 $79.95
The JOBE Dredge Header Box is used to convert your stream sluice into
a 2 inch dredge. All precision laser cut aluminum construction. Works on
the JOBE 45 Yellow Jacket, the Keene A52, or any 10 inch wide sluice.
The mounting holes are precut to bolt onto the JOBE sluice and the
JOBE sluice stand. Mounting to the Keene A52 requires two 1/4" holes
to be drilled on the sides of the header box. Weighs only 3 pounds.
#-6507 $79.95
Magnum Power Sluice C1/
The JOBE Magnum Power Sluice is designed around the JOBE 48 inch Yellow Jacket sluice.
Attaching the JOBE adjustable 4 leg stand, the JOBE Power Sluice header box, and the
Mayfair 2200 gallon-per-hour 12 volt pump all ads up to a very good hi-volume power
sluice. It can also be set up with a recovery tub to complete a power sluice recirculating
system. Includes 6 feet of 1 1/2 inch discharge hose. #-6527 $319.95
The JOBE Magnum Power Sluice is designed around the JOBE 48 inch Yellow Jacket sluice.
Attaching the JOBE adjustable 4 leg stand, the JOBE Power Sluice header box, and the
Mayfair 2200 gallon-per-hour 12 volt pump all ads up to a very good hi-volume power
sluice. It can also be set up with a recovery tub to complete a power sluice recirculating
system. Includes 6 feet of 1 1/2 inch discharge hose. #-6527 $319.95
2 1/2 HP Power Sluice
The JOBE Power Sluice is designed around the JOBE 48 inch Yellow Jacket stream sluice.
The JOBE adjustable 4 leg stand and the JOBE Power Sluice header box are attached to
the sluice. Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The pump and engine
combination weighs only 27 pounds and is mounted on a shock-resistant base plate with a
carry handle. It can also be set up with a recovery tub to complete a power sluice
recirculating system. Includes 6 feet of 1 1/2 inch intake hose, an intake screen, 25 feet of 1
1/2 inch lay-flat discharge hose, and all necessary fittings. The sluice also comes with an
aluminum flare, not shown, which replaces the Power Sluice Header Box so that the sluice
can also be used as a normal stream sluice. #-6528 $469.95
The JOBE Power Sluice is designed around the JOBE 48 inch Yellow Jacket stream sluice.
The JOBE adjustable 4 leg stand and the JOBE Power Sluice header box are attached to
the sluice. Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The pump and engine
combination weighs only 27 pounds and is mounted on a shock-resistant base plate with a
carry handle. It can also be set up with a recovery tub to complete a power sluice
recirculating system. Includes 6 feet of 1 1/2 inch intake hose, an intake screen, 25 feet of 1
1/2 inch lay-flat discharge hose, and all necessary fittings. The sluice also comes with an
aluminum flare, not shown, which replaces the Power Sluice Header Box so that the sluice
can also be used as a normal stream sluice. #-6528 $469.95
Power Sluice / Hibanker
The JOBE Power Sluice is designed around the JOBE 48 inch Yellow Jacket stream sluice.
The JOBE adjustable 4 leg stand and the JOBE Hibanker Hopper are attached to the sluice.
Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The pump and engine combination
weighs only 27 pounds and is mounted on a shock-resistant base plate with a carry handle.
It can also be set up with a recovery tub to complete a hibanker recirculating system.
Includes 6 feet of 1 1/2 inch intake hose, an intake screen, 25 feet of 1 1/2 inch lay-flat
discharge hose, and all necessary fittings. The sluice also comes with an aluminum flare,
not shown, which replaces the Power Sluice Header Box so that the sluice can also be used
as a normal stream sluice. The unit is designed to easily convert to a 1 1/2 or 2 inch dredge
with the addition of a few parts. #-6529 $669.95
The JOBE Power Sluice is designed around the JOBE 48 inch Yellow Jacket stream sluice.
The JOBE adjustable 4 leg stand and the JOBE Hibanker Hopper are attached to the sluice.
Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The pump and engine combination
weighs only 27 pounds and is mounted on a shock-resistant base plate with a carry handle.
It can also be set up with a recovery tub to complete a hibanker recirculating system.
Includes 6 feet of 1 1/2 inch intake hose, an intake screen, 25 feet of 1 1/2 inch lay-flat
discharge hose, and all necessary fittings. The sluice also comes with an aluminum flare,
not shown, which replaces the Power Sluice Header Box so that the sluice can also be used
as a normal stream sluice. The unit is designed to easily convert to a 1 1/2 or 2 inch dredge
with the addition of a few parts. #-6529 $669.95
Universal Sluice Stand C1/ 69-439
This powder coated steel sluice stand is designed to easily bolt on to any sluice and
provide a sturdy platform to use the sluice as a hibanker, power sluice, or dredge. The 3/4
inch square tubular legs are independently adjustable for leveling or setting any angle on
any terrain. The forward legs are 16 inches long and the rear legs are 20 inches long. The
entire kit weighs 5 pounds. All mounting hardware and instructions are included.
DOES NOT INCLUDE THE SLUICE BOX! #-6501 $47.95
This powder coated steel sluice stand is designed to easily bolt on to any sluice and
provide a sturdy platform to use the sluice as a hibanker, power sluice, or dredge. The 3/4
inch square tubular legs are independently adjustable for leveling or setting any angle on
any terrain. The forward legs are 16 inches long and the rear legs are 20 inches long. The
entire kit weighs 5 pounds. All mounting hardware and instructions are included.
DOES NOT INCLUDE THE SLUICE BOX! #-6501 $47.95
This super high powered backpack dredge is equipped with a lightweight, heavy-duty
2.5hp 4 cycle engine that nearly doubles the power from our previous models. This
smooth dredge produces an unbelievable 100 gallons per minute and 161 feet of head
pressure. The sluice box is specifically engineered for fine gold recovery and easy clean
up. The 2004PJF is constructed with an aluminum frame and either inflatable or Marlex
pontoons. The inflatable pontoons can be easily deflated and rolled up into a small
package making them extremely easy to transport and store. Our Model 2004PJF comes
equipped with a power jet which is ideal for most conditions and provides the most suction
power. Net weight is 65 lbs.
PART NUMBER 2004PJF
MSRP:$1,349.00
OUR PRICE $1285.00 Shipping Weight: 86.00 pounds
2.5hp 4 cycle engine that nearly doubles the power from our previous models. This
smooth dredge produces an unbelievable 100 gallons per minute and 161 feet of head
pressure. The sluice box is specifically engineered for fine gold recovery and easy clean
up. The 2004PJF is constructed with an aluminum frame and either inflatable or Marlex
pontoons. The inflatable pontoons can be easily deflated and rolled up into a small
package making them extremely easy to transport and store. Our Model 2004PJF comes
equipped with a power jet which is ideal for most conditions and provides the most suction
power. Net weight is 65 lbs.
PART NUMBER 2004PJF
MSRP:$1,349.00
OUR PRICE $1285.00 Shipping Weight: 86.00 pounds
The 2004PSNF is the same high powered, lightweight machine as our 2004PJF but is
equipped with the suction nozzle for extremely shallow conditions. Nothing but
performance from this little dredge! Net weight is 66 lbs. PART NUMBER:
2004PSNF
MSRP:$1,349.00
OUR PRICE $1285.00 Shipping Weight: 90.00 pounds
equipped with the suction nozzle for extremely shallow conditions. Nothing but
performance from this little dredge! Net weight is 66 lbs. PART NUMBER:
2004PSNF
MSRP:$1,349.00
OUR PRICE $1285.00 Shipping Weight: 90.00 pounds
We've taken our 2004PJ Back Pack Dredge, tossed in our HBCKH Power Sluice Hopper, our
HBCKF Frame Legs and souped this baby up into one powerful little conversion! Why haul all
the material to the water when you can work straight from the source? Equipped with a 2" x 1
1/4" power jet and a capacity of up to 1.5 yards per hour, this model was too good to just slate
as a simple conversion. Complete with 25 feet of pressure hose and couplings, this is a definite
must for any prospector that wants results.
PART NUMBER: 2004PJFH
MSRP:$1,745.00
OUR PRICE $1660.00Shipping Weight: 125.00 pounds
HBCKF Frame Legs and souped this baby up into one powerful little conversion! Why haul all
the material to the water when you can work straight from the source? Equipped with a 2" x 1
1/4" power jet and a capacity of up to 1.5 yards per hour, this model was too good to just slate
as a simple conversion. Complete with 25 feet of pressure hose and couplings, this is a definite
must for any prospector that wants results.
PART NUMBER: 2004PJFH
MSRP:$1,745.00
OUR PRICE $1660.00Shipping Weight: 125.00 pounds
Another fantastic conversion that deserves its own spotlight! The 2004SNH is the lightest, most
productive combination gold recovery machine on the market today. This conversion is
comprised of our 2004SN Dredge, HBCKH Power Sluice Hopper, HBCKF adjustable legs, our 2"
x 1 1/4" SN2 model suction nozzle, 25 feet of pressure hose and couplings. This package has
performance written all over it!
PART NUMBER: 2004SNFH
MSRP:$1,745.00
OUR PRICE $1660.00 Shipping Weight: 125.00 pounds
productive combination gold recovery machine on the market today. This conversion is
comprised of our 2004SN Dredge, HBCKH Power Sluice Hopper, HBCKF adjustable legs, our 2"
x 1 1/4" SN2 model suction nozzle, 25 feet of pressure hose and couplings. This package has
performance written all over it!
PART NUMBER: 2004SNFH
MSRP:$1,745.00
OUR PRICE $1660.00 Shipping Weight: 125.00 pounds
The lightest, most portable sluice available and is great for backpacking.
Made of polypropylene plastic with 2 ABS plastic Hungarian riffle systems with
miners moss pads the entire unit weighs less than 2 pounds. Custom
corrugation molded into the plastic, traps gold making recovery awesome and
set-up a breeze. The E-Z sluice is black, 2 1/2" deep, 24" long and 7" wide.
Close up of corrugation and a riffle set. Riffle sets have Hungarian type riffles
and the riffle tray snaps in and out for easy clean up.
W-5896 $37.95
Made of polypropylene plastic with 2 ABS plastic Hungarian riffle systems with
miners moss pads the entire unit weighs less than 2 pounds. Custom
corrugation molded into the plastic, traps gold making recovery awesome and
set-up a breeze. The E-Z sluice is black, 2 1/2" deep, 24" long and 7" wide.
Close up of corrugation and a riffle set. Riffle sets have Hungarian type riffles
and the riffle tray snaps in and out for easy clean up.
W-5896 $37.95
Aluminum flare for EZ Sluice Box. 7" long by 12" wide at
mouth. Comes with screws and nylock nuts.
.
W-5897 $17.95
mouth. Comes with screws and nylock nuts.
.
W-5897 $17.95
The E-Z Sluice Kit contains the same E-Z sluice as above, a 15
minute video on how to use the E-Z sluice and pan for gold, a
snuffer bottle for picking up the gold from your pan and a 32 page
book on how and where to use the E-Z sluice across the USA.
W-5897 $47.95
minute video on how to use the E-Z sluice and pan for gold, a
snuffer bottle for picking up the gold from your pan and a 32 page
book on how and where to use the E-Z sluice across the USA.
W-5897 $47.95
 |
 |
 |
 |
 |
 |
 |
 |
 |
| 1 1/2" Back Pack Power Sluice Combo. Designed and built be Fine Gold Recovery right here in Oregon. $955.00 plus shipping. |
| 2" Power Sluice Combo with Legs designed and built by Fine Gold Recovery right here in Oregon. $1,260.00 plus shipping |
Mega Box Power Sluice Hopper (12 X 48 sluice) on a leg assembly
complete with 5.5 hp Honda/300 pump.
$1925.00.00 plus shipping
Without pump and Honda
$795 plus shipping
complete with 5.5 hp Honda/300 pump.
$1925.00.00 plus shipping
Without pump and Honda
$795 plus shipping